Description
OVERDRIVE M4 _SLALOM BLASTING
The OverDrive focuses on maximum reaching speed with increased twist and less back-hand pressure. A lighter weight means improved handling characteristics.
A moderate width sleeve, 7 battens, and 3 cams provide draft stability through a huge wind range. Combined with a higher aspect ratio, the OverDrive M4 has impeccable handling characteristics; a lightweight feel, with softer flex.
Smaller sizes (5.5 and down) have 6 battens to increase flex and control for when conditions get extreme.
The OverDrive M4 benefits directly from advances made on the Mach4 development. Higher aspect ratios and increased leverage add to the efficiency. Flow aligned battens further improve aerodynamics. The resulting performance is explosive acceleration and big numbers on the GPS.
The OverDrive M4 can be run on either RDM masts or SDM masts.
KEY DIFFERENCES BETWEEN THE MACH4 AND OVERDRIVE M4
/ Sleeve width: 33% narrower than Mach4 for lower weight and less water retention.
/ Boom length: Approx. 10cm shorter on most sizes for less backhand pressure.
/ Lighter, softer feel
| 021 OD M4 | Luff | Boom | Battens | Weight | Head | Mast | Enigma Boom | Boom | Extension | CAM SETUP | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 4.6 | 381 | 164 | 6 | 3.65 | FIXED | SEVERNE 370 | RDM or SDM | Enigma 160 | METAL 160 | Triple X | 3x RDM cams |
| 5.0 | 402 | 167 | 6 | 3.85 | FIXED | SEVERNE 400 | RDM or SDM | Enigma 160 | METAL 160 | Triple X | 1xRDM(top cam)*, 2xSDM included. Option to change bottom 2 cams to RDM. |
| 5.5 | 416 | 178 | 6 | 4.0 | FIXED | SEVERNE 400 | RDM or SDM | Enigma 160 | METAL 160 | Triple X | 1xRDM(top cam)*, 2xSDM included. Option to change bottom 2 cams to RDM. |
| 6.2 | 433 | 186 | 7 | 4.4 | FIXED | SEVERNE 430 | RDM or SDM | Enigma 160 | METAL 160 | Triple X | 1xRDM(top cam)*, 2xSDM included. Option to change bottom 2 cams to RDM. |
| 7.0 | 461 | 189 | 7 | 4.65 | FIXED | SEVERNE 430 | RDM or SDM | Enigma 180 | METAL 170 | Triple X | 1xRDM(top cam)*, 2xSDM included. Option to change bottom 2 cams to RDM. |
| 7.8 | 489 | 200 | 7 | 4.9 | FIXED | SEVERNE 460 | RDM or SDM | Enigma 180 | METAL 170 | Race Carbon | 1xRDM(top cam)*, 2xSDM included. Option to change bottom 2 cams to RDM. |
| 8.6 | 512 | 208 | 7 | 5.2 | FIXED | SEVERNE 490 | SDM | Enigma 190 | METAL 170 | Race Carbon | 3x SDM |
| 9.4 | 520 | 218 | 7 | 5.4 | FIXED | SEVERNE 490 | SDM | Enigma 190 | Race Carbon | 3x SDM | |
| * RDM top cam also works for SDM masts |
