Neilpryde Glide Surf Foil 2020

CA$1199.00CA$1299.00

Effacer
Ajouter à mes favoris
Ajouter à mes favoris

Description

GLIDE SURF

creates a playground for building new surfing sensations. With a stable and fast take off no matter the surf conditions, the GLIDE SURF delivers superior gliding and controlled speed to ride waves as far as they can flow. On the wave, the Glide Surf allows you to fly through the sections and progress from straight riding to progressive foil-turns. Your imagination is now the only limitation to how you will use the waves and how far you will fly.

Pump from one wave to the next – see how long you can fly!

WINGSPAN CM/INCHORD LENGTH CM/INTOP AREA CM2 / IN2BOTTOM AREA CM2 / IN2PROJECTION AREA CM2/IN2
Front wing S63.6 / 2522 / 8.71148 / 177.91044.8 / 161.91045 / 162
Front wing M74.9 / 29.522.6 / 8.91370.9 / 212.51310.4 / 203.11262.7 / 195.7
Front wing SLIM M80.2 / 31.620.7 / 8.11302.5 / 201.91256.1 / 194.71230.1 / 190.7
Front wing L85.8 / 33.823.1 / 9.11602.2 / 248.31537.4 / 238.31484.7 / 230.1
Front wing XL100 / 39.424 / 9.42083.4 / 322.92029 / 314.51963.7 / 304.4
Tail wing S39.5 / 15.67.7 / 3245.4 / 38248.5 / 38.5230.5 / 35.7
Tail wing L51 / 20.18 / 3.1330.3 / 51.2336.3 / 52.1316.7 / 49.1

BASE SYSTEMNP Glide Surf Foil Adapter Mounts (Powerbox, Deep Tuttlebox ...

New CNC reinforced base construction.
Two deep titanium vertical tube connections to the mast for maximum strength, eliminating movement and offering perfect load transfer. Avoids vibration around the upper attachment area.

GLIDE SURF foil comes with top plate base system.

CONSTRUCTION

All foils are supplied with a T-40 torx drive, and come with titanium plated stainless steel bolts for maximum strength to weight ratio, preventing any corrosion problems.

NEILPRYDE FOIL GLIDE SURF 2020 - Ocean PlayersTAIL WING ADJUSTMENT – NEUTRAL

Across our foils, the tail wings are there to deliver inverted thrust to balance the main wings to ensure stability and control. The foils come with a standard neutral tail wing setting.

TAIL WING ADJUSTMENT – DOWN TILTED

A down-tilted setting ensures higher stability and more control in lighter winds, it naturally lifts the foil more and increases the low-end power. This setting is also a go-to when you are a heavier rider.

TAIL WING ADJUSTMENT – UP TILTED

An up-tilted setting will help to reduce drag and lift, by up-tilting the tail wing setting, this can also be of benefit to lighter riders or in heavier wind conditions.

MAST2019 Neil Pryde Glide Surf/SUP Aluminum Mast with Carbon Wing

65 cm aluminum mast. Optimized structure with two CNC female base system inserts ensuring maximum strength.

Hollow construction to reduce weight combined with x3 vertical cross-ribs for maximum stiffness. Sanded mast trailing edge to avoid planning turbulence noise. Tempered, salt water corrosion resistant 6061-T6 aluminum.

SURF FUSELAGE2020 Neil Pryde NP Glide Surf Foil

Perfectly blended wing to CNC machined fuselage connection and integrated wind saddle providing minimum drag. Volume and weight of the aluminum used in the fuselage is reduced by eliminating the forward protruding nose.

WINGS2019 Neil Pryde Glide Foil Large Front wing

GLIDE wings are made of pre-preg carbon layup with inner foam construction for maximum durability to weight ratio. This setup creates a natural tendency to roll into turns maintaining a nice balance during your ride.

The front wing is designed with a pronounced rounded “angle of attack” and an elliptical bend shape. While flying, this thick leading edge on the front wing naturally closes the radius of your turn, tightening it. Far back,

the angled down tail wings maintain a self- stabilizing roll allowing an easy turning performance.

During this momentum, the GLIDE tail wing will always come back to a flat position, stabilizing the turn.

 

 

Informations complémentaires

Marque

Condition

Année

Programme

Composition

Longueur (cm)

, , ,